What You Need to Know About Electrical Code Compliance

Posted On: November 15, 2018

residential electrical servicesIf you’re upgrading your home’s electrical system or about to start a remodeling project, then it’s important to be aware of electrical code compliance requirements. Electrical codes are specifically designed to set a safety standard that minimizes the chances of injuries and property damage due to electrical shock, faults, or fires. In other words: While complying with electrical codes might seem like a hassle, it’s an investment in your and your family’s safety.

Of course, due to increased household power consumption and technological advancements, homes today have to meet a different set of requirements than homes that were built 20, 30, or 40 years ago. And although you won’t be required to upgrade your home’s old wiring just because it’s old, it’s a good idea to do it because it’s much, much safer.

Once you start working on your home’s electrical system, it’s good to have a general overview of all applicable requirements. The following brief overview will provide you with a basic understanding of electrical code compliance.

National and local codes

  • National Codes. The National Electrical Code (NEC) describes all national codes for both commercial and residential wiring.
  • Local Codes. In addition to the NEC, there are also local codes that are determined by local building departments. Note that local codes can vary significantly between different municipalities.

General code requirements

  • Circuits. Existing circuits cannot be overloaded by the addition of a new service. Residential buildings generally have 120-volt circuits at 15 amps, with kitchen and utility areas having 20 amps.
  • Wires. 15 amp circuits require a 14-gauge wire, and 20 amp circuits require 12-gauge wire.
  • Service Panels. Service panels usually don’t require upgrading unless you’re adding a new circuit.
  • Cable. Non-metallic cable can generally be used unless the cable will be exposed, in which case conduit or armored cable will probably be needed.
  • Fixtures and Appliances. All fixtures, appliances, receptacles, and switches must be safely grounded.
  • Boxes. Most municipalities allow plastic boxes, although there are some local codes that require metal boxes.

Additional code requirements

In addition, there are also highly detailed electrical code requirements for each room in the home, as well as the home’s exterior. For example, pull chains for light activation are not allowed in many rooms including the bedroom, living room, and dining room. A kitchen with several appliances such as a dishwasher, garbage disposal, stove, refrigerator, and microwave may require those appliances to be on their own individual circuits. In the bathroom, all receptacles must be GFCI-protected and light fixtures must be moisture-proof. Exterior electrical receptacles and lighting must all have waterproof covers and fittings, and cable may not be exposed.

How Reliable Can Help Keep Your Home Safe

Your home inspection report will identify fire and other safety dangers and instances where you have inadequate wiring for your outlets and appliances being run.  At the end of our work, your home will be completely up to code and safe for all electrical functionality. Need to make sure your home is up to code standards?  Just call Reliable for a whole-home check!

Don’t wait for an accident or system failure to get your electrical system inspection. Call Reliable today to schedule your code compliance check!